Banner materials
To ensure our clients get the finest printed banners we only recommend materials that pass the strictest of tests. We consider print quality and durability, ease of tailoring and finishing, whether the banner hangs straight with no edge curl, and also whether it rolls up easily for transportation.

These are descriptions of materials ideally suited for all D4 displays. You can narrow your choice down by going straight to the star ratings for choice of material. Or, call us for further information or to request a sample.

Cotech with satin seal
This totally opaque polyester film was specially designed for banner displays. It has a bright white surface and a dark grey opaque blockout backing to the reverse - the ideal choice when no show through is required. The printed image is sealed with a polyester film to ensure printed surfaces are protected. This is one of our most popular banner materials, very durable, excellent for colour matching, and hangs perfectly straight. Printed on the HP5000 with dye based inks. No current fire rating. Maximum printing width 150cm .

Metallic light block
A very durable polyester fabric with good drape characteristics. Can be printed on both sides if required. The surface has a satin metallic sheen which enhances printed images. An opaque core ensures it is 100% light blocking. Only suitable for dye sublimation printing, to a maximum printing width of 135cm. Edges are finished using a hot knife which seals the material and prevents fraying. Ideal choice for the D4 Curved displays.

Reverse print PVC
A two-part banner material with graphics reverse printed onto the back of a clear film and then sealed with a white backing film. The encapsulated image is scratch, water, and solvent resistant. This is a very robust banner material highly recommend for displays which are going to see a lot of use. e.g. sales demonstrations, events, road shows and travelling exhibitions. Printed on the HP5000 with dye based inks. Maximum printing width of 90cm.

Satin paper
Our entry level banner material. This bright white 180gsm paper has a semi-gloss finish with good print contrast and high colour brilliance. Ideally suited for short term displays, Point Of Sale and presentations. Not fire rated. Printed using the HP5000 and Encad Novajet with dye based inks. Maximum printing width 150cm.

Polypropylene
The lightweight 220gsm polypropylene looks like paper but does not need sealing. It has a flat matt surface finish which is waterproof and tear resistant, but not scratch proof. Ideal for tight budgets or for banners being used only once. Not fire rated and susceptible to fading after 3 months. Printed using HP5000 with pigment based inks. Maximum printing width 150cm.

Glass fibre
A unique woven glass fibre fabric with an M0 fire rating which does not burn or give off toxic smoke when in contact with fire. The inkjet coating is suitable for dye based inks. Printed on HP5000 or similar machines. This is an ideal banner material for displays in shopping centres, museums and trade shows where the fire risk is important. Maximum printing width 150cm.

Polyethylene light block
A 230gsm white polyethylene material with an opaque core and good drape characteristics. It has a matt surface finish and can be used either indoor or for short term outdoor use when used with pigment inks. This material can be used with either dye or pigment based HP5000 or Mimaki JV3 printers. Maximum printing width of 150cm.

E–Screen Mesh
A fine mesh material made from woven PVC coated glass fibres. Printed using solvent inks with the Durst Rho. The woven structure gives high strength and good drape characteristics, with a M1 fire rating. This material works particularly well with D4 Curved Displays. Cut edges do not fray and pockets can be formed using high frequency welding. Maximum printing width 150cm.

Clarissa
A translucent matt finish polyester fabric. Only suitable for dye sublimation printing, with a maximum printing width of 150cm. Edges are finished using a hot knife which seals the materials and stops it from fraying. Fire rating certificate BS5687, equivalent to Class O.

Amelia satin SM
Similar to Clarissa fabric, but with a semi-gloss finish.

Trivera FR01
A translucent semi-gloss finish polyester fabric. Only for dye sublimation printing. It has an M1 fire rating making it suitable for interior and permanent display work. Edges are finished using a hot knife which seals the materials and stops it from fraying; pockets are sewn. Maximum printing width 120cm.

Soltis 86
A mesh type fabric with 14% openness. This unique material allows the viewer to see through the banner while displaying graphics. The PVC coating takes permanent pigment inks for solvent based printers such as the Durst Rho. Fire retardant M2 coating and tailored using high frequency welding. Maximum printing width 150cm.